UPHOLSTERY


Upholstery plays an important role in the appearance and comfort of Artifort furniture. Every fabric has its own character and material characteristics. The composition of the fibres and the weaving technique determine properties such as elasticity, wear resistance and texture. These characteristics influence whether a fabric is suitable for a particular design.

With everyday use, the upholstery may become more supple, and slight creases and wrinkles may develop. This is a natural result of the foam settling and the upholstery adapting to the shape of the furniture. These subtle changes are characteristic of the material and give the furniture a softer, more relaxed appearance. They cannot be entirely prevented.


TEXTILE MATERIALS


> POLYESTER

Polyester is a synthetic fibre known for its high wear resistance, shape retention and ease of care. The fibre absorbs little moisture, is easy to clean and is relatively resistant to bacteria and mould. Depending on its composition, polyester may also have flame-retardant properties.

In dry environments, polyester can develop a static charge, causing dust particles to be attracted more easily. Maintaining a relative humidity of approximately 50–60% helps to reduce this effect.

> COTTON
Cotton is a natural fibre with good wear resistance and moisture absorption. The fabric is less susceptible to static electricity and is generally easy to clean. However, cotton tends to attract dirt more readily than wool and therefore benefits from regular care.

> TREVIRA CS
Trevira CS is a synthetic fibre with permanent flame-retardant properties. This makes it particularly suitable for applications where specific fire safety requirements apply.

Trevira CS is also easy to clean, dries quickly and retains its shape. Its flame-retardant properties are embedded in the molecular structure of the fibre and therefore remain effective after cleaning.

> WOOL
Wool is a natural fibre with good wear resistance, moisture-regulating properties and low susceptibility to static electricity. Wool is also naturally flame-retardant to a certain extent.

With new wool upholstery, loose fibres may initially appear on the surface. This natural characteristic gradually diminishes over time and does not affect the fabric's wear resistance. Avoid allowing wool upholstery to become completely soaked.



FOAM AND SEATING COMFORT


The seating comfort of Artifort furniture is partly determined by the properties of the foam. For each design, the ideal combination of density and firmness is carefully selected to complement its shape and provide the desired level of comfort.

Foam requires time to stabilise. This process can take up to approximately six months, during which its firmness may decrease by around 15 to 20%. As a result, the furniture gradually feels softer and more comfortable. At the same time, the upholstery adapts to the foam, which may lead to slight creasing. This is a natural part of everyday use.

Use the different seating areas as evenly as possible to minimise variations in softness and creasing. Regularly plump loose seat and back cushions, rotate their positions and turn them over where possible. This helps to maintain their volume and comfort.




CARE AND CLEANING


With the right care, the appearance and quality of the upholstery can be preserved for as long as possible. Regular vacuuming and careful use help to minimise wear and soiling. The appropriate care method depends on the type of fabric.

Always use a cleaning product suitable for the specific fabric and carefully follow the instructions for use. Test any product on an inconspicuous area first.

CARE GUIDELINES
• Vacuum regularly. Remove dust and surface dirt using a soft upholstery brush and a low suction setting. Preferably use a brush reserved exclusively for upholstery. For fabrics with a pile, always vacuum gently in the direction of the nap.

• Avoid direct sunlight. Prolonged exposure to strong sunlight can significantly affect the colour of your upholstery. Dark and intensely coloured fabrics are particularly susceptible to fading. Synthetic fibres are generally less sensitive to discolouration.

• Consider the effect of light. Velvet-like fabrics and fabrics with a pile may appear to change colour depending on the direction of the light and the viewing angle. Subtle variations in shade may therefore be visible. This is characteristic of the material's texture.

• Remove pilling with care. Small balls of fibre may develop on some fabrics as a result of friction. This is known as pilling and may be caused by loose fibres from the upholstery or from clothing. Pilling can be carefully removed using a suitable fabric shaver.

• Prevent damage. Sharp objects, jewellery, shoe buckles, heels and pets' claws can permanently damage the upholstery. Coarse materials, such as denim, may also accelerate wear through friction. Avoid allowing children to play on the furniture while wearing shoes.

• Be aware of colour transfer. Dark-dyed clothing, including denim, may transfer colour onto the upholstery. This can cause permanent discolouration, particularly on light-coloured fabrics.

• Protect your floor. Fit suitable felt pads to the furniture legs where necessary to prevent damage to the floor.


CARE FOR ARTIFORT TEXTILES
The Artifort Textiles fabrics Ox, Lana, Selecte, Spektra and Viya have been tested by LCK® Nederland, a leading specialist in furniture care. Specific care recommendations are available for these fabrics, including recommended cleaning and care products.

View the care recommendations to ensure the appropriate care for your Artifort upholstery.


Artifort Textiles care recommendations



STAIN REMOVAL


Treat stains as quickly as possible to prevent dirt or moisture from penetrating deep into the fibres. The appropriate cleaning method depends on the composition and properties of the fabric.

SOLID SUBSTANCES
Carefully remove solid residues using a spoon or a soft, clean cloth. Work from the outside towards the centre of the stain to prevent it from spreading. Avoid rubbing or scraping.

LIQUID STAINS
Blot up any spilt liquid as quickly as possible using a clean, absorbent cloth. Do not rub the fabric, as this may push dirt deeper into the fibres or damage the texture.

For many fabrics, remaining stains can be gently treated with a slightly damp cloth, provided the care instructions for the specific fabric allow this.

DRIED STAINS
Carefully remove dried residues by hand or with a soft brush. Then vacuum the affected area using a suitable upholstery attachment and a low suction setting. Treat any remaining stain only in accordance with the care recommendations for the specific fabric.

CLEANING PRODUCTS
Never use undiluted cleaning products, bleach, ammonia or cleaning products intended for hard surfaces. These may damage the fibres or affect the colour of the upholstery.

For stubborn stains, professional cleaning may be an option. Have this carried out by a qualified cleaning specialist and discuss the available options and any potential risks beforehand. Such treatment is undertaken at your own risk.

PLEASE NOTE: SAFE USE OF CLEANING PRODUCTS
Chemical cleaning agents and solvents may be harmful to health, toxic and/or flammable. Always follow the product's safety instructions.

Always wear suitable protective gloves and clothing. Carefully cover any parts of the furniture that are not being treated, particularly wooden components. Ensure adequate ventilation during and after treatment. Do not use heaters or other direct heat sources to accelerate the drying process.


Go back to overview >

Empty
Click + to add content